GODRY MAXCOAT 1X

Description
Application Procedure
FAQs (4)
Videos

Description

GODRY MAXCOAT 1X can be used:

As waterproof coating for small areas
As bonding aid between old and new concrete
As bonding agent for floor toppings, mortars, construction joints, etc.
For wear resistant floor screeds with less dusting and improved resistance to cracking

Application Procedure

Surface Preparation

Clean the surface and reinforcement bars thoroughly and ensure it is free from dust, dirt, grease, loose particles and any contamination.
Smooth surfaces must be mechanically roughened to provide adequate key.

For Waterproof Coating

Slowly add MAXCOAT 1X to cement in the ratio of 1:1.5 (MAXCOAT 1X:Cement) by volume.
Mix for 2 to 3 minutes by hand, if the quantity is less, or with a spiral paddle stirrer.
Apply the first coat by brush and allow it to dry for 4 to 6 hours.
Once the first coat is dry, apply the second coat and overlay the coating with a protective screed.

For Bonding Coat

Mix 1 part of MAXCOAT 1X with 1 part of cement to a creamy consistency.
Apply the bonding coat with a stiff brush to the pre-wetted and prepared substrate.
Subsequent mortar must then be applied while the bonding coat is still in tacky condition.

FAQs (4)

GODRY MAXCOAT 1X is a modified styrene butadiene rubber (SBR) emulsion specially designed to form a bonding slurry when mixed with cement. It can be used to waterproof small areas and to repair mortars and concrete in building rehabilitation works.

Available in 1 litre, 10 litre and 20 litre containers.

MAXCOAT 2X is an exclusive waterproofing product which is used in areas where large quantities of water can attack the concrete at high pressure. While, GODRY MAXCOAT 1X is a waterproofing cum bonding agent which is used for waterproofing small areas and also used as bonding & repair mortar.

All cementitious surfaces.

Videos