GODRY MAXCOAT 2X can be used in bathrooms, water tanks, swimming pools, roofs, water retaining structures, sewage treatment plants, etc.
Application Procedure
- Clean the surface thoroughly and repair the damages, if any, using repair mortar.
- Shake the liquid component (Part A) well and pour it into a clean plastic or metal bucket/drum.
- Add the powder component (Part B) gradually to the liquid avoiding any lump formation while constantly mixing with a stirrer or a paddle.
- Mix for 2-3 minutes to a homogeneous and uniform consistency.
- For best results, moisten the surface with clean water prior to application.
- Apply the 1st coat of mixed material using a short, stiff bristle brush over the surface.
- Once the 1st coat reaches touch dry state, Apply the 2nd coat to achieve a combined thickness of 1 to 2 mm.
- The applied area should be protected from direct sunlight and should be damp cured by placing wet hessian or similar system.
FAQs (6)
GODRY MAXCOAT 2X is a ready to use two-component elastomeric waterproof and protective coating for concrete and masonry surfaces. It provides an effective protection for the substrate against decay and water-damage.
Available in 3 kg and 15 kg packs.
All cementitious surfaces.
No. Water should not be added to the mix.
The applied area should be protected from direct sunlight and should be damp cured by placing wet hessian or similar system.
Not necessarily. But, applying subsequent finish will help in protecting the coating from abrasion, erosion, etc.
Videos
Application procedure of GODRY MAXCOAT 2X
கோடிரை மேக்ஸ்கோட் 2X உபயோகிக்கும் செயல்முறை
Application procedure of GODRY MAXCOAT 2X (Malayalam)
