GODRY MAXCOAT 2X

Two Component Elastomeric Waterproof Coating

Excellent resistance to water permeability

Provides tough and durable coating

Strong adhesion to cementitious substrates

Good resistance to chlorides in water

Flexible, breathable and non-toxic

AREAS OF APPLICATION

Basements

Roof slabs

Water retaining structures

Bathrooms

Water Tanks

Swimming pools

Sewage treatment plants

Sunken slabs

USAGE PROCEDURE

Thoroughly clean the surface to remove all dirt and repair damaged surfaces using polymer modified repair mortar.

Shake the liquid component (Part A) well and pour it into a clean plastic or metal bucket/drum.

Add the powder component (Part B) gradually to the liquid and mix for 2-3 minutes to a homogeneous and uniform consistency.

Moisten the surface, apply the 1st coat mixed material using a short stiff bristle brush over the surface and allow it to reach touch dry state.

Apply the 2nd coat to achieve a combined thickness of 1 to 2 mm.

The applied area should be protected from direct sunlight and should be damp cured by placing wet hessian or similar system.

PRODUCT FAQS

What is GODRY MAXCOAT 2X?

GODRY MAXCOAT 2X is a ready to use two-component elastomeric waterproof and protective coating for concrete and masonry surfaces. It provides an effective protection for the substrate against decay and water-damage.

What are the available packs in GODRY MAXCOAT 2X?

Available in 3 kg and 15 kg packs.

What type of surface is ideal for applying GODRY MAXCOAT 2X?

All cementitious surfaces.

Should water be added while mixing GODRY MAXCOAT 2X?

No. Water should not be added to the mix.

Do we need to cure the surface after applying GODRY MAXCOAT 2X?

The applied area should be protected from direct sunlight and should be damp cured by placing wet hessian or similar system.

Do we need subsequent finishes over GODRY MAXCOAT 2X?

Not necessarily. But, applying subsequent finish will help in protecting the coating from abrasion, erosion, etc.

PRODUCT VIDEOS