GODRY MAXCOAT 1X

SBR Based Bonding And Waterproofing Agent

Provides excellent bonding

Improves water resistance

Increases tensile and flexural strength

Improves abrasion resistance

Non-toxic and easy to use

ENQUIRE GODRY MAXCOAT 1X Download Brochure`

AREAS OF APPLICATION

As waterproof coating for small areas.

As bonding agent for floor toppings, mortars, construction joints, etc.

As bonding aid between old and new concrete.

For wear resistant floor screeds with less dusting and improved resistance to cracking

USAGE PROCEDURE

Clean the surface thoroughly and ensure it is free from any contamination.

Add MAXCOAT 1X to cement in the ratio of 1:1.5 (MAXCOAT 1X:Cement) by volume.

Brush apply 2 coats of the mix and overlay the coating with a protective screed.

Clean the surface thoroughly and ensure it is free from any contamination.

Mix 1 part of MAXCOAT 1X with 1 part of cement to a creamy consistency.

Apply with a stiff brush to the pre-wetted and prepared substrate.

Apply subsequent mortar while the bonding slurry is still in tacky condition.

PRODUCT FAQS

What is GODRY MAXCOAT 1X?

GODRY MAXCOAT 1X is a modified styrene butadiene rubber (SBR) emulsion specially designed to form a bonding slurry when mixed with cement. It can be used to waterproof small areas and to repair mortars and concrete in building rehabilitation works.

What are the available packs in GODRY MAXCOAT 1X?

Available in 1 litre, 10 litre and 20 litre containers.

How GODRY MAXCOAT 1X differs from GODRY MAXCOAT 2X?

MAXCOAT 2X is an exclusive waterproofing product which is used in areas where large quantities of water can attack the concrete at high pressure. While, GODRY MAXCOAT 1X is a waterproofing cum bonding agent which is used for waterproofing small areas and also used as bonding & repair mortar.

What type of surface is ideal for applying GODRY MAXCOAT 1X?

All cementitious surfaces.

PRODUCT VIDEOS