Provides excellent bonding

Improves water resistance      

Increases tensile and flexural strength                 

Improves abrasion resistance                           

Non-toxic and easy to use                           

Areas of Application

GODRY MAXCOAT 1X can be used:

  • •  As waterproof coating for small areas.
  • •  As bonding aid between old and new concrete.
  • •  As bonding agent for floor toppings, mortars, construction joints, etc.
  • •  For wear resistant floor screeds with less dusting and improved resistance to cracking.

Application Procedure

For Waterproofing Coating

Clean the surface thoroughly and ensure it is free from any contamination.

Add MAXCOAT 1X to cement in the ratio of 1:1.5 (MAXCOAT 1X:Cement) by volume.

Brush apply 2 coats of the mix and overlay the coating with a protective screed.                                    

For Bonding Slurry

Clean the surface thoroughly and ensure it is free from any contamination.                     

Mix 1 part of MAXCOAT 1X with 1 part of cement to a creamy consistency.                     

Apply with a stiff brush to the pre-wetted and prepared substrate.                                         

Apply subsequent mortar while the bonding slurry is still in tacky condition.

Working Properties

Packaging Available in 1 litre, 10 litre and 20 litre containers.
Shelf Life & Storage 12 months from the date of manufacturing, if stored in original and unopened packaging. Store in a cool dry place away from direct sunlight.