Areas of Application
Thoroughly clean the surface to remove all dirt and repair damaged surfaces using polymer modified repair mortar.
Shake the liquid component (Part A) well and pour it into a clean plastic or metal bucket/drum.
Add the powder component (Part B) gradually to the liquid and mix for 2-3 minutes to a homogeneous and uniform consistency.
Moisten the surface and apply the 1st coat of mixed material using a short, stiff bristle brush over the surface and allow it to reach touch dry state.
Apply the 2nd coat to achieve a combined thickness of 1 to 2 mm.
The applied area should be protected from direct sunlight and should be damp cured by placing wet hessian or similar system.